What you need to do before starting a Roots blower
Before starting the Roots blower there are those preparations that you need to know and pay attention to? About this questionRoots BlowerI'll take you through it.
1. Fully open the inlet regulator valve, the outlet regulator valve and the bypass tube;
2. Check whether the air inlet air filter is clear and whether the filter inlet is fully open;
3、Check whether pipes, valves, mufflers, air filter support is stable, there shall be no load force added to the casing;
4, check whether the lubricant is good, whether the type is appropriate, the depth of the lubricant layer should reach 3 ~ 5 cm above the specified oil line, whether the cooling water system is unobstructed;
5、Toggle the coupling, check the impeller transit is suitable, there is no friction collision;
6, check whether the parts of the joint is good, there is no loosening;
7, clear the surrounding debris, keep the fan within two meters of no debris;
8. Check that the electrical parts as well as the buck-start equipment are in good condition;
9, check whether the maintenance tools are complete, fire extinguishing equipment is sufficient and complete.
On the “start the Roots blower before the need to do to prepare” small make up for you here, if you still have questions you can visit our website to consult the understanding.
