What do I need to pay attention to during the installation of a Roots fan?
Roots FansIn the process of installation there are those matters that you need to pay attention to and understand? On this issue Roots blower small editor to take you to understand.
1, please pay special attention to safety when handling the fan, to avoid the rotary blower to be touched and impact, and can not stand up the fan handling to prevent the lubricating oil from the oil tank poured out.
2, the fan room should be left with vents and install ventilation fans, vents should be located in the upper and lower two places to facilitate air convection, in order to prevent high temperatures in the room affect the normal operation of the fan.
3. The inner wall of the machine room is equipped with sound-deadening materials around to reduce the noise.
4. The fan should be water-mounted.
5, air distribution pipe diameter should not be smaller than the rotary blower exhaust caliber, and pay attention to the pipe clean, air supply pipe should be installed above the water surface, in order to prevent the pipe into the water caused by excessive pressure at the time of starting.
6. Be careful not to unscrew the check valve when taking over (the raised part of the check valve should be facing up).
7、Please connect the power distribution line correctly and pay attention to the motor steering and fan rotation direction marking the same.
8, the use of two fans running alternately, should be avoided in a short period of time in the frequent exchange of starting fan, hope that a fan of continuous operation time of not less than 12 hours.
About “Roots fan installation process need to pay attention to what?” I will introduce you here, if you still have questions you can visit our website to consult the understanding.
